Simple EFP To Fiber
- Brand: NVOC
- Type: NV-Simple EFP
Simple EFP To Fiber
Simple EFP To Fiber includes a Camera Optic Adaptor and aOptic Base Station. The system transports 1 ch 3G/HD-SDI signal from the camerato the Base Station, intercom (Camera end can be connected professional 4-pinor 5-pin XLR headset, OB end can be connected intercom main station), tally(Onecolor or two colors can be selected). The system puts all of the signals neededfor multi-camera 3G/HD-SDI production on a fiber cable, insuring robust,trouble-free connectivity on any studio or remote production. The bottom of thescrew hole can be fitted with a camera shoe mount.
Because of its simple function, 4 bases canbe combined into one Optic Base Station.
Features
· 1 chforward SDI
· Handleall Pathological patterns
· Automaticcable equalization to ensure signal integrity
· 3G/HD/SD-SDIinput auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M,SMPTE 292M and SMPTE 259M
· 10+Kmon single mode fiber transmission
· Micinputs with mute and pre-amps
· Headphonewith volume up or down
· TallyLED+/- output or dry Contact Closure optional
· Genlockor TC/BB are optional
· Remotecontrol data is also optional
· Bottomscrew hole can be installed with a camera shoe mount
Specifications:
General index
|
Work Temp |
-25°C to 55°C |
|
Storage Temp |
-40°C to 85°C |
|
humidity |
0 ~ 95% (non-condensing) |
|
Camera Optic Adaptor |
|
|
Input power |
DC 11~19V |
|
Power consumption |
<10W |
|
Net weight |
<0.5kg |
|
Appearance size |
140mm*82mm*28mm |
|
Optic Base Station |
|
|
Input power |
AC90~240V |
|
Power consumption |
<20W |
|
Net weight |
3kg |
|
Appearance size |
19” 1U standard rack mount |
Optical：
|
Wavelength |
1310nm / 1550nm / CWDM |
|
Output Power |
-6~-1dBm |
|
Rx sensitivity |
<-18dBm |
|
Transmission Distance |
SM fiber10km, MM fiber 550m |
|
Optical connector |
ST / FC / SC / LC |
SDI input/output:
|
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
|
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
|
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
|
SDI interface |
BNC 75 Ohm |
Genlock / TC / BB(can be optional)
|
Number of Channels |
1 |
|
Input/output impedance |
BNC 75Ω (unbalance) |
|
Input/output voltage |
1.0Vp-p |
|
Differential Gain |
< ±1.5% |
|
Differential Phase |
< ±1% |
|
SNR |
>60dB |
Intercom:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
|
Microphone |
Mic inputs with mute and pre-amps |
|
Headphone |
with volume up or down |
|
Optic Base Station |
|
|
Interface |
DB9(Female) or 3.5mm jack: Line level unbalanced audio input and output, |
Tally:
|
Camera Optic Adaptor |
|
|
Interface |
3.5mm jack or 3pin mini XLR |
|
Output |
Dry Contact Closure or wet LED+/- |
|
On: short or LED on Off: open or LED off |
|
|
Optic Base Station |
|
|
Interface |
DB9(Male) |
|
Input |
Dry Contact Closure or TTL |
|
On: short to GND or TTL low Off: open or TTL high |
|
