EFP Fiber Optic for Datavideo Intercom Remote
EFP Fiber Optic for Datavideo Intercom Remote includes a Camera Optic Adaptor and a Optic Base Station. The systemtransports 1ch 3G/HD-SDI signal from the camera to the Base Station, 1ch reverse3G/HD-SDI(optional), Genlock or BB/TC, Remote control for Datavideo (compatiblewith Datavideo MULTI-CAMERACONTROL UNIT MCU-100), Datavideo intercom (Camera end be connected Datavideo HP1Single-Ear Headset or professional 4-pin / 5-pin XLR headset, OB end be connected Datavideo ITC-100Talkback System), tally(2 colors, Camera end be connected Datavideo ext tallylamp TD3, OB end be connected Datavideo ITC-100 Talkback System), Remote camera power supply (optional ,14.6V DC up to 100 Watts). Thesystem puts all of the signals needed for multi-camera 3G/HD-SDI production ona fiber cable, insuring robust, trouble-free connectivity on any studio orremote production.
Features
1. 1 ch forward and 1 ch reverse SDI(optional)
2. Handle all Pathological patterns
3. Automatic cable equalization to ensuresignal integrity
4. 3G/HD/SD-SDI input auto recognition,support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE259M
5. Mic inputs with mute and pre-amps
6. Headphone with volume up or down
7. Remote control (Sony/ Panasonic/JVC/Ikegami/Datavideo optional)
8. Tally LED+/- wet output or dry ContactClosure optional
9. V-mount or A-mount (Anton/Bauer)batteryplate optional
10. Genlock or TC/BB is available
11. Reverse PGM / IFB audio is optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (optional ,14.6VDC up to 100 Watts), with insertion detection protection, Lemo SMPTE 304 or NeutrikOpticalCON DUO connector
14. SMPTE hybrid cable 200+m
Specifications:
Generalindex
Work Temp |
-25°C to 55°C |
Storage Temp |
-40°C to 85°C |
humidity |
0 ~ 95% (non-condensing) |
Camera Optic Adaptor |
|
Input power |
DC 11~19V |
Power consumption |
<12W |
Net weight |
1kg |
Appearance size |
188mm*116mm*45mm (without V-mount / A-mount) |
Optic Base Station |
|
Input power |
AC90~240V |
Power consumption |
<12W |
Net weight |
3kg |
Appearance size |
19” 1U standard rack mount |
Optical:
Wavelength |
1310nm / 1550nm / CWDM |
Output Power |
-6~-1dBm |
Rx sensitivity |
<-18dBm |
Transmission Distance |
SM fiber 10+km , MM fiber 300m |
Optical connector |
Dual LC /FC/ST / Lemo / Neutrik (optional) |
SDIinput/output:
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface |
BNC 75 Ohm |
Genlock /TC / BB
Number of Channels |
1 |
Input/output impedance |
BNC 75Ω (unbalance) |
Input/output voltage |
1.0Vp-p |
Differential Gain |
< ±1.5% |
Differential Phase |
< ±1% |
SNR |
>60dB |
Intercom:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone |
Mic inputs with mute and pre-amps |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
5pin XLR Male, be connected Datavideo Talkback System |
Tally:
Camera Optic Adaptor |
|
Interface |
3.5mm jack, be connected Datavideo ext tally lamp |
Output |
Green/Red 2 colors |
On: LED on Off: LED off |
|
Optic Base Station |
|
Interface |
5pin XLR Male |
Input |
be connected Datavideo Talkback System |
Remote:
Camera Optic Adaptor |
|
Interface |
RJ45 Datavideo remote interface Compatible with Sony’s and Panasonic’s cameras |
Data |
RS422 /RS232/RS485 |
Optic Base Station |
|
Interface |
RJ45 Datavideo remote interface |
Data |
RS422 /RS232/RS485 |
PGM:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode |
Full duplex/half duplex |
Data Rate |
10/100Mbps(AUTO) |
connection terminal |
RJ45 |
Can becustomized.