EFP to Fiber For Sony CCU
EFP to fiber for Sony CCU includes a Camera Optic Adaptor and a OpticBase Station. The system transports 1ch 3G/HD-SDI signal from the camera to theBase Station, Genlock or BB/TC, Remote control for Sony or Panasonic camera(compatible with the camera control unitRM-B150, RM-B170 or RM-B750, it also can use in Panasonic camera and RCU via Remote ControlCable for Sony to Panasonic), intercom (Camera end can beconnected professional 4-pin or 5-pin XLR headset, OB end can be connectedintercom main station), tally(One color or two colors can be selected).Thesystem puts all of the signals needed for multi-camera 3G/HD-SDI production ona fiber cable, insuring robust, trouble-free connectivity on any studio orremote production.
Because ofits simple function, 4 bases can be combined into one Optic Base Station.
Features
1. 1ch forward and 1ch reverse SDI
2. Handle all Pathological patterns
3. Automatic cable equalization to ensuresignal integrity
4. 3G/HD/SD-SDI input auto recognition,support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE259M
5. Mic inputs with mute and pre-amps
6. Headphone with volume up or down
7. Remote control (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)
8. Tally LED+/- wet output or dry ContactClosure optional
9. V-mount or A-mount (Anton/Bauer)batteryplate optional
10. Genlock or TC/BB is available
11. Reverse PGM/IFB audio optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (14.6V DC up to100 Watts), with insertion detection protection, Lemo SMPTE 304 or Neutrik OpticalCONDUO connector
14. SMPTE hybrid cable 200+m
Specifications:
Generalindex
Work Temp |
-25°C to 55°C |
Storage Temp |
-40°C to 85°C |
humidity |
0 ~ 95% (non-condensing) |
Camera Optic Adaptor |
|
Input power |
DC 11~19V |
Power consumption |
<12W |
Net weight |
1kg |
Appearance size |
188mm*116mm*45mm (without V-mount / A-mount) |
Optic Base Station |
|
Input power |
AC90~240V |
Power consumption |
<12W |
Net weight |
3kg |
Appearance size |
19” 1U standard rack mount |
Optical:
Wavelength |
1310nm / 1550nm / CWDM |
Output Power |
-6~-1dBm |
Rx sensitivity |
<-18dBm |
Transmission Distance |
Remote power 100W,SMPTE hybrid cable 200+m |
Optical connector |
Dual LC/ST/FC |
SDIinput/output:
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface |
BNC 75 Ohm |
Genlock /TC / BB
Number of Channels |
1 |
Input/output impedance |
BNC 75Ω (unbalance) |
Input/output voltage |
1.0Vp-p |
Differential Gain |
< ±1.5% |
Differential Phase |
< ±1% |
SNR |
>60dB |
Intercom:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone |
Mic inputs with mute and pre-amps |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
Camera Optic Adaptor |
|
Interface |
4pin or 3pin mini XLR |
Output |
Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off |
|
Optic Base Station |
|
Interface |
DB9(Male) |
Input |
Dry Contact Closure or TTL |
On: short to GND or TTL low Off: open or TTL high |
Remote:
Camera Optic Adaptor |
|
Interface |
Sony’s 8 pin interface |
Data |
RS422 /RS232/RS485 |
Optic Base Station |
|
Interface |
Sony’s 8 pin interface |
Data |
RS422 /RS232/RS485 |
PGM:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode |
Full duplex/half duplex |
Data Rate |
10/100Mbps(AUTO) |
connection terminal |
RJ45 |
Can becustomized.