2ch forward SDI to fiber broadcast live shooting

SDI 2ch forward + 1ch return

Tally 1ch

BB/TC 1ch

Intercom to main station Balanced audio

Ethernet 10/100M

PGM 1ch

Remote power supply Lemo SMPTE 304

2ch forward+1ch reverse SDI to fiber broadcast live shooting includes a Camera Optic Adaptor and aOptic Base Station. The system transports 2ch 3G/HD-SDI signal from the camerato the Base Station, 1ch reverse 3G/HD-SDI, Genlock or BB/TC, intercom (Cameraend can be connected professional 4-pin or 5-pin XLR headset, OB end can beconnected intercom main station), tally(One color or two colors can beselected), 1ch reverse PGM audio ,1ch 10/100M Ethernet ,Remotecamera power supply (14.6V DC up to 100 Watts). The system puts all of thesignals needed for multi-camera 3G/HD-SDI production on a SMPTE hybrid cable,insuring robust, trouble-free connectivity on any studio or remote production.

Features

1. 2ch forward and 1ch reverse SDI

2. Handle all Pathological patterns

3. Automatic cable equalization to ensuresignal integrity

4. 3G/HD/SD-SDI input auto recognition,support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE259M

5. Mic inputs with mute and pre-amps

6. Headphone with volume up or down

7. Remote control (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)

8. Tally LED+/- wet output or dry ContactClosure optional

9. V-mount or A-mount (Anton/Bauer)batteryplate optional

10. Genlock or TC/BB is available

11. Reverse PGM/IFB audio optional

12. 10/100M Ethernet is optional

13. Remote camera power supply (14.6V DC up to100 Watts), with insertion detection protection, Lemo SMPTE 304 or NeutrikOpticalCON DUO connector

14. SMPTE hybrid cable 200+m

Specifications:

Generalindex

Work Temp	-25°C to 55°C
Storage Temp	-40°C to 85°C
humidity	0 ~ 95% (non-condensing)
Camera Optic Adaptor
Input power	DC 11~19V
Power consumption	<12W
Net weight	1kg
Appearance size	188mm116mm45mm (without V-mount / A-mount)
Optic Base Station
Input power	AC90~240V
Power consumption	<12W
Net weight	3kg
Appearance size	19” 1U standard rack mount

Optical：

Wavelength	1310nm / 1550nm / CWDM
Output Power	-6~-1dBm
Rx sensitivity	<-18dBm
Transmission Distance	Remote power 100W，SMPTE hybrid cable 200+m
Optical connector	Lemo SMPTE 304 / Neutrik OpticalCON DUO Camera end can be rotated 90 degrees

SDIinput/output:

Signal format	SMPTE 424M, SMPTE 292M, SMPTE 259M
Data rate	270Mbit/s - 1.48Gbit/s - 3Gbit/s
Cable Equalization	Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
SDI interface	BNC 75 Ohm

Genlock /TC / BB

Number of Channels	1
Input/output impedance	BNC 75Ω (unbalance)
Input/output voltage	1.0Vp-p
Differential Gain	< ±1.5%
Differential Phase	< ±1%
SNR	>60dB

Intercom:

Camera Optic Adaptor
Interface	4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack
Microphone	Mic inputs with mute and pre-amps
Headphone	with volume up or down
Optic Base Station
Interface	3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB25(Female): balanced audio input and output,

Tally:

Camera Optic Adaptor
Interface	4pin or 3pin mini XLR
Output	Dry Contact Closure or wet LED+/-
	On: short or LED on Off: open or LED off
Optic Base Station
Interface	DB9(Male)
Input	Dry Contact Closure or TTL
	On: short to GND or TTL low Off: open or TTL high

PGM:

Camera Optic Adaptor
Interface	4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack
Headphone	with volume up or down
Optic Base Station
Interface	3pin XLR Female: Line level balanced audio input Or DB25(Female): balanced audio input

Ethernet：

Work mode	Full duplex/half duplex
Data Rate	10/100Mbps(AUTO)
connection terminal	RJ45

Can becustomized.

More Products

24C PDLC Amored Patch Cord

24C LC Amored Patch Cord

16C LC Reel Amored Patch Cord

12C ODC Reel Fiber Patch Cord